8
9
GETTING STARTED
C
ONTOUR
®
N
EXT
ONE blood glucose monitoring system
Initial Setup from the Meter
OK Button
Press and hold the
OK button
for 2 seconds until the meter turns on.
The screen displays the
Power On Self Test
.
All symbols on the screen and the white strip port briefly light up. It is
very important to verify that
8.8.8
displays fully and that the white light
from the test strip port is visible.
If there are missing characters or if the strip port light is a color other
than white, contact Diabetes Care Customer Service. This may affect
the way you see your results.
Initial Setup begins with
View Pre-Set Target
.
View Pre-Set Target
The meter displays a pre-set
Overall
Target Range
. You can change
this pre-set Target Range from
the C
ONTOUR
D
IABETES
app after
initial setup.
To move to the next screen, press
the
OK button
. Continue to
Set the Time
.
Set the Time
The hour is blinking.
1.
To change the hour, press the or
button
on the outer ring.
Outer Ring
2.
To set the hour and move to
minutes, press the
OK button
.
3.
To change the minutes, press
the or
button
on the outer
ring, then press the
OK button
.
For a 12-hour format, select
AM
or
PM
, press the or
button
,
then press the
OK button
.
Continue to
Set the Date
.
85096877_CntrNxtONE_UG_EN.indd 8-9
9/21/16 3:46 AM
