Remote Battery Installation
Tail installation
1. Use a screwdriver to remove the battery cover.
3. Replace the battery cover and screw back into place.
The dinosaur has been installed batteries, please remove the insulating tape from the
batteries before use.
2. Place three AA’s with the corresponding polarities as labeled on the unit.
Battery Warnings
1.
Insert batteries with correct polarity.
2.
Do not mix old and new batteries.
3.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
4.
Rechargeable batteries are to be removed from the drone before being charged.
5.
Rechargeable batteries are only to be charged under adult supervision.
6.
Exhausted batteries are to be removed from the drone.
7.
The supply terminals are not to be short-circuited.
8.
In order to avoid battery leakage causing damage to the remote controler, please take out the
battery if not in use for a long time.
Push the tail on until it "clicks".
