Continuum Cobra S, Руководство пользователя

Страница: 25 / 33

audible science audible science
page 48
INSTALLATION & SETUP
CONT.
HOW TO ADJUST THE AZIMUTH cont.
The azimuth must be adjusted with the cartridge at rest
or using an old record and the cartridge cover installed.
WARNING: DO NOT ATTEMPT TO ADJUST THE
AZIMUTH DURING PLAY AS SERIOUS DAMAGE TO
THE STYLUS COULD OCCUR.
The Cobra uses two pivots to stabilise the arm in the
vertical plane. The main center pivot is fixed.
The secondary pivot is adjustable. This secondary pivot
can be raised or lowered by adjusting the sapphire
“swash plate” that it sits on. By raising or lowering
this secondary pivot the arm wand is rotated in the
longitudinal dimension resulting in the stylus azimuth
being adjusted.
The “sapphire” plate can be wound down (clockwise
rotation when viewed from above) or wound up
(anticlockwise when viewed from the top). There are two
azimuth swash plate locking grub screws which need to
be loosened before adjusting.
INSTALLING
& TUNING
YOUR COBRA