Continuum Cobra S, Руководство пользователя

Страница: 20 / 33

audible science audible science
page 38
INSTALLATION & SETUP
CONT.
HOW TO ADJUST VTA AND SRA cont.
Raise or lower the cross arm till the main pivot touches
the edge of the ruler. This is the level point from which to
adjust the VTA up or down.
To tighten the thumbscrews use only light finger force
as these thumbscrews can exert many kilograms of
pressure.
HOW TO MOUNT THE CARTRIDGE
The Cobra headshell is a one piece contruction and
accepts all standard 12.7mm cartridges, MC and MM.
Mount cartridge in the headshell according to the
manufacturers instructions. Use the cartridge mounting
screws supplied with your Cobra.
Do not force or overtorque the M2.5 screws.
Connect the Cartridge pins to the arm wire following the
cartridge manufacturers instructions.
INSTALLING
& TUNING
YOUR COBRA
Cobra one piece headshell
use supplied screws to
mount cartridge