6 After Sales
Service
Apart from the routine maintenance and adjustments
stipulated in this manual the equipment must not be
tampered with in any way. All further servicing must
be carried out only by an engineer from an Authorised
Agent. Failure to observe these conditions will
invalidate the Guarantee.
6.1
On-Site Service / Overhaul /
Spare Parts
If you require a Service Engineer to attend ON SITE,
either due to an equipment fault, or for machine
calibration, or if you need spare parts, please contact
our Product Support Department
6.2
UK After-Sales Service
Call Continental support for details of local service
agents.
This symbol indicates that, in compliance
with the WEEE directive (2002/96/EC)
and with your local regulations, this
product must not be disposed of with
household waste. It must be deposited in
a zone specific to this effect, for example
an official electric and electronic
equipment (EEE) waste collection centre
for recycling, or at an approved product exchange point
which is available when purchasing a new product of the
same type as the product being disposed of. Any failures to
respect these recommendations on the disposal of this type
of waste can have negative effects on the environment and
public health because these electric and electronic products
generally contain potentially dangerous substances. In
parallel, your complete collaboration in the correct disposal
of this product will contribute to a better use of natural
resources. For more information on equipment collection
points for recycling, contact your town hall, the waste
collection department, the approved WEEE plan or the
household waste removal service.
Operating Manual RBT240 / RBT270
Operating Manual RBT240 / RBT270
26
27
Plug this USB stick into a free USB port on the RBT
control PC.
Select AWS and click on folder button.
Browse to certificate folder on your USB stick and
select XXXX.properties
Validate by a click on bottom right button and restart
software.
5.5
Maintenance
Maintenance menu (password protected).
Calibration must be carried out by an approved
person. For service contract options and further
information contact Continental Sales on 0121 725
1400 or email salesordrs@continental-
corporation.com
5.6
Diagnostic
This window contains the diagnostic of all sensors are
inside the brake tester.
5.7
About
This window contained the manufacturer contact
details, the maintenance company details and
information about the software versions. For more
information about our products, go to the website:
www.capalec.fr