Check for excessive fluctuation of brake effort
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
›
Abort test (Press ESC)
Gradually release the service brake and check
for rate decrease.
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
›
Abort test (Press ESC)
Gradually apply the service brake
The imbalance left-right is measured
Roller stop at:
›
Lock
›
Force stable during 3 seconds
›
Release pedal force
›
Wheels out of the rollers
›
Abort test (Press ESC)
You can invalidate and restart if you press ESC
You have 5 seconds to drive out. I you don’t
have any time you can press OK.
Test the second and/or third axle as
seen previously.
Operating Manual RBT240 / RBT270
Operating Manual RBT240 / RBT270
22
23
4.3.2 Automatic Mode (ATL)
Refer to the MOT Insection Manual for details of the correct MOT test procedure.
Software
Command
To Do
Drive into brake tester
The weight measurement starts automatically.
The weighing results are displayed on the
screen
Motors starts automatically.
2 secs to centralise
Stay inside the car. Nobody around
the car during the test.
›
Check for Bind
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
Abort test (Press ESC)
›
Slowly apply service brake
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
Abort test (Press ESC)
›
Check for rate of increase
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
Abort test (Press ESC)
›
Hold the pedal pressure steady
Roller stop at:
›
Lock
›
Release pedal force
›
Wheels out of the rollers
Abort test (Press ESC)