Continental Fireplaces CI-1402, Инструкция по установке и эксплуатации

Страница: 13 / 32

13
W415-0872 / B / 12.02.10
5.0 FINISHING
A. Install six (A) bricks along both sides of the appliance. Before installing the back bricks, loosen the
screw holding the retainer and ensure that it has been moved forward. Install the four (A) bricks and
two (D) bricks along the back wall by pivoting the bricks up under the brick retainer. Retighten the
screw.
NOTE: Center (D) bricks have been cut.
B. Carefully pivot fi bre baffl e (H) up onto the top of the side brick. Slide it over onto the fl ange of the
manifold. Ensure that the top baffl es are pushed all the way to the rear of the fi rebox, leaving a
minimum of a 1” gap along the front. This will allow the fl ue gases to escape the fi rebox.
C. Install the bottom six (A) bricks and two (B) bricks, working from the back of the appliance forward.
D. Install the two (B) bricks, one (E) brick and one (F) brick along the front.
NOTE: Do not operate if baffl e and manifold shield are not in position.
5.1 BRICKS AND BAFFLES INSTALLATION
OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE TEMPERA-
TURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE SURROUNDING ENCLOSURE.
!
WARNING
A
A A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
H
D
D
E
F
H
A