EN
W415-1438 / 02.17.15
15
5.0 FINISHING
!
WARNING
POWER SUPPLY SERVICE MUST BE COMPLETED PRIOR TO FINISHING TO AVOID
RECONSTRUCTION.
HEAT VENTS AND AIR OPENINGS CANNOT BE COVERED IN ANY CIRCUMSTANCES.
5.1 GLASS DOOR REMOVAL AND INSTALLATION
A.
Remove the 4 screws off the appliance, as shown.
B.
Remove the glass front and place on a soft non-abrasive
surface.
C.
Reverse these steps to reinstall the glass front.
!
WARNING
FACING AND/OR FINISHING MATERIAL MUST NOT INTERFERE WITH AIR FLOW THROUGH AIR
OPENINGS, LOUVRES OPENINGS, OPERATION OF LOUVRES OR DOORS OR ACCESS FOR
SERVICE. OBSERVE ALL CLEARANCES WHEN APPLYING COMBUSTIBLE MATERIALS.
BEFORE DOOR IS REMOVED TURN THE APPLIANCE OFF AND WAIT UNTIL APPLIANCE IS COOL
TO THE TOUCH. DOORS ARE HEAVY AND FRAGILE SO HANDLE WITH CARE.
SCREW
A.
Remove the card board holding the logs,
grate and ember bed assembly to the
appliance.
B.
Pinch the back of the assembly and lift it
up from the appliance.
SCREW
EMBER
BED
* CEFB27H ILLUSTRATED
5.2 LOG, GRATE AND EMBER BED ASSEMBLY REMOVAL
For Model CEFB29H:
A.
Remove the 2 screws, as shown.
B.
Lift the log, grate and ember bed up from
the appliance and remove.
For Model CEFB24H and CEFB27H:
SCREW
