background image

WARNING 

SAFETY INFORMATION 

CBHD4N 

CBHD4P 

This appliance may be installed in an 
aftermarket, permanently located, manufactured 
home (USA only) or mobile home, where not 
prohibited by local codes. 

 

This appliance is only for use with the type of 
gas indicated on the rating plate. This appliance 
is not convertible for use with other gases, 
unless a certified kit is used. 

INSTALLER: LEAVE THIS MANUAL WITH THE APPLIANCE. 

 

CONSUMER: RETAIN THIS MANUAL FOR FUTURE REFERENCE. 

 

NEVER LEAVE CHILDREN OR OTHER AT RISK INDIVIDUALS ALONE WITH THE APPLIANCE. 

EN 

INSTALLATION AND 

OPERATING INSTRUCTIONS

 

 

 

FR 
PG 
65 

CERTIFIED TO CANADIAN AND AMERICAN NATIONAL STANDARDS: CSA 2.22 AND ANSI Z21.50 FOR VENTED GAS FIREPLACES. 

 

 

FOR INDOOR USE ONLY 

   NATURAL GAS 

 

 

PROPANE 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

 

 
 
 

 

$10.00 

  

1.8F 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

CE  RT  IFIE  D

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

W415-1283 / E / 12.21.16 

If the information in these instructions 
are not followed exactly, a fire or 
explosion may result causing property 
damage, personal injury or loss of life. 

HOT GLASS 

WILL CAUSE 

BURNS.

 

DO NOT TOUCH 

GLASS UNTIL 

COOLED.

 

NEVER ALLOW 

CHILDREN TO 

TOUCH GLASS.

 

A barrier designed to reduce the risk of burns from 
the hot viewing glass is provided with this appliance 
and shall be installed for the protection of children 
and other at-risk individuals.

 

DANGER

 

!

 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 
other appliance. 
- WHAT TO DO IF YOU SMELL GAS: 
• 

Do not try to light any appliance. 

• 

Do not touch any electrical switch; do not  use 
any phone in your building. 

• 

Immediately call your gas supplier from a 
neighbour‟s phone. Follow the gas supplier‟s 
instructions. 

• 

If you cannot reach your gas supplier, call  the 
fire department. 

- Installation and service must be performed by a 
qualified installer, service agency or the supplier. 

Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON, L4M 0G8 Canada / 

103 Miller Drive, Crittenden, Kentucky, USA, 41030 

Phone (705)721-

1212 • Fax (705)720-9081 • www.continentalfireplaces.com • ask@continentalfire.on.ca 

Содержание CBHD4N




































































Отзывы: