26
After a successful pairing, the Bluetooth icon on LED display will stop blinking
AUX MODE
Keep the unit powered on. Plug one end of the 3.5 mm AUX cord to the headphone jack on your
device;
Plug the other end of the 3.5 mm AUX cord into the AUX jack on the speaker;
It successfully joins into the AUX Mode along with AUX icon lights up;
Use the connected device's audio controls for music playback.
USB AND MICRO-SD MODE
The speaker is able to read lossless audio if audio files MP2/MP3/WMA/WAV/FLAC formats are in
USB disk or micro SD card.
USB mode
Turn on the unit. Push USB disk with music files into USB port at the rear panel of speaker, it will
switch to USB Playback Mode and then start to play music automatically.
Micro SD card mode
Push the micro SD card with music files into the micro SD card slot with the metal contacts facing
down. The card will stick out of the slot about halfway. Waiting for a while, it will play music
automatically.
GUARANTY
The warranty does not cover product wear parts, neither problems or damage resulting
from:
(1) superficial damage due to normal wear of the product
(2) defects or damage due to contact of the product with food or liquids, and due to corrosion
caused by rust;
(3) any incident, abuse, misuse, modification, unauthorized removal or repair;
(4) any improper maintenance operation not in accordance with product instructions or
connection to improper voltage use;
(5) any use of accessories not supplied or approved by CONTINENTAL EDISON.
The warranty will be cancel in case of elimination of the rating label and/or the serial number
product.
