CONTINENTAL EDISON CERVC001, Руководство пользователя

Страница: 35 / 39

35
Some malfunctions can be easily solved. Before calling your after-sales
service or repairer, please consult the following table:
Problem Possible reason Solution
Abnormal sound The robot is blocked
and no longer moves Remove accumulated dirt
around the wheel from the main
brush
The unit is
running and
stops suddenly
despite the full
charge of the
battery The main brush
wheel is stuck, it can
not turn or the battery
is defective. Remove the main brush wheel
and clean it. If it still does not
work. Consult the dealer for
replacing the battery or
changing the defective part.
The device stops
when it is in
operation, the
LED indicator
flashes quickly 1. The device is
blocked
2. The main brush
wheel is blocked
3. Malfunction of the
machine.
1. Move the device, turn it off
and then on again.
2. Clean the wheel of the main
brush
3. Send the unit to the after-
sales service if the problem
persists.
LED indicator
flashes slowly Low battery Charge the battery
The camera is
turning
abnormally. 1. Dirt around the
multi-directional
wheel
2. Dirt on the fall
sensor
1. Remove dirt from the wheel
2. Clean the fall sensor using a
soft cloth or tissue.
The device
makes trips to
the same place. Deformed ground.
Object stuck under
the device.
Check that the floor is flat and
that no object is under the unit.
The device falls
down the stairs Malfunction of the fall
arrest sensor Clean the fall arrest sensor with
a soft cloth or cloth. If the
problem persists, send it to the
after-sales service
VII. TROUBLESHOOTING