CONTINENTAL EDISON CELED32S0716B3, Руководство по эксплуатации

Страница: 37 / 122

English - 35 -
To change channel: Press the middle of the button,
the information banner will appear on the screen.
Scroll through the stored channels by pushing the
button up or down.
To change source: Press the middle of the button
twice(for the second time in total), the source list will
appear on the screen. Scroll through the available
sources by pushing the button up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Notes:
• If you turn the TV off, this circle starts again
beginning with the volume setting.
• Main menu OSD cannot be displayed via control
button.
Operation with the Remote Control
Press the
Menu
button on your remote control to
display main menu screen. Use the directional buttons
to select a menu tab and press OK to enter. Use the
directional buttons again to select or set an item. Press
Return/Back or Menu button to quit a menu screen.
Input Selection
Once you have connected external systems to your
TV, you can switch to different input sources. Press the
Source button on your remote control consecutively
to select the different sources.
Changing Channels and Volume
You can change the channel and adjust the volume
by using the /- and Programme +/- buttons
on the remote.
Inserting the Batteries into the Remote
Lift the cover on the back
of the remote gently.
Insert two AAA batteries.
Make sure the (+) and (-)
signs match (observe
correct polarity). Place
the cover back on.
Connect Power
IMPORTANT : The TV set is designed to operate on
220-240V AC, 50 Hz socket. After unpacking, allow
the TV set to reach the ambient room temperature
before you connect the set to the mains. Plug the
power cable to the mains socket outlet.
Antenna Connection
Connect the aerial or cable TV plug to the AERIAL
INPUT (ANT) socket located on the back of the TV.
Notification
TRADEMARK ACKNOWLEDGMENT
The terms HDMI and High-Definition
Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing
LLC in the United States and other countries.
Manufactured under license
from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
YouTube and the YouTube logo are trademarks of
Google Inc.
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
Equipment bearing these symbols should not be
disposed as general household waste.
Products
Battery
You should look for appropriate
recycling facilities and systems
for the disposal of these
products.
Notice: The sign Pb below the
symbol for batteries indicates that
this battery contains lead.
Specification
TV Broadcasting PAL BG/DK/II’ SECAM BG/DK
Receiving Channels
VHF (BAND I/III) - UHF
(BAND U) - HYPERBAND
Digital Reception
Fully integrated digital
terrestrial-cable TV (DVB-T-C)
(DVB-T2 compliant)
Number of Preset
Channels
1.000
Channel Indicator
On Screen Display
RF Aerial Input 75 Ohm (unbalanced)
Operating Voltage 220-240V AC, 50Hz.
Audio Nicam Stereo
Audio Output Power
(WRMS.) (10% THD)
2 x 6
Power Consumption (W) 65
Weight (Kg) 6,55
TV Dimensions DxLxH
(with foot) (mm)
185 x 735 x 478
TV Dimensions DxLxH
(without foot) (mm)
77/97 x 735 x 438
Display
31,5"
Operation temperature
and operation humidity
0ºC up to 40ºC, 85%
humidity max