Edition 07/2008 - XEOS EVOLUTION 2 - XEOS TALL CUP
NOTES TECHNIQUES - TECHNICAL DOCUMENTS - page 36
SACOME, Document CONFIDENTIEL,
Ne peut être reproduit ni communiqué sans notre accord préalable.
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
27.
ACCESS VIA THE SIDE PANELS
REMOVING THE SIDE PANEL
Remove the cup warmer
(standard machine)
For ULN version, take off the 4 screws before removing the cup warmer
’.
Remove the hook
which maintains the side panels, by passing the hand inside the machine.
Take down the higher (on the rear)
, without forcing too much.
Once this taken down part, draw the whole to the top
delicately.
REFITTING THE SIDE PANEL
Encase the panel in its support
.(pour les Xéos TC)
Place the base of the panel against the frame, lock the lower back side of the panel into position,
then the front side, leaving the panel slightly inclined
’ (pour les autres machines)
Set up the top of the side panel then engage it in
its housing and make return the front panel
simultaneously.
Close again the hook which maintains the side panel
, and fix the cup warmer again.
1
2
4
3
1’
XEOS TC
4’
XEOS EV
D
é
m
o
n
ta
g
e
/
R
e
m
o
v
in
g