Edition 05/2014 - X-ONE - page 11
SACOME, CONFIDENTIAL Document,
it is forbidden to duplicate or communicate this document without previous authorization.
7.3
COFFEE DOSES PROGRAMMING:
+
- ENTER
MENU
2 ways of programming are possible to set the coffee dose.
Choose 1st group (on the left when the user is in front of the machine)
o
To program all groups at the same time with the same value.
o
The programmed key will have its equivalent key programmed identically on the others groups
Choose each groups separately, if they the groups need to have different value against each other.
Methodology:
Put the ground coffee (1 dose or 2 doses according to the programmed key), in the suitable filter holder.
Press the key n°5 (MENU) from the selected group during 5 seconds.
Display shows «Press dose selection within 30s».
Press the key to be programmed to start the flow, and press again when water quantity is correct. The
value is directly registered.
Then, continue programming the next key within 30 seconds, and so on for the other keys.
You can use any coffee button after the message « Press dose selection within 30s » disappears.
Note : On the factory, each machine undergoes a test protocol on which a program has already been
completed, according to the following settings:
1 espresso = 2,5 cl / 2 espressos = 5 cl / 1 coffee = 4,5 cl / 2 coffee = 9 cl
