Conti MONTE-CARLO, Техническая документация инструкция

Страница: 42 / 60

MONTE-CARLO - 11/2015 - SOFT V 2.11 42
15 MAINTENANCE OF MACHINES

DAILY MAINTENANCE
- Clean the hot water outlet and the steam outlets with a scouring pad:
o
Use a needle to keep the diffuser outlets unclogged.
o
Then purge by opening the tap a few seconds.
-
Clean the drip tray and the basin, removing them from the machine.
- Remove the filter-holder and clean the seal injection filter-holder with the brush.
-
Use the automatic process cleaning:
o
Push on the « clean » button
o
The automatic cleaning process of the group is started in 3 steps:
o
The process is shown on the display.
o
The machine asks for blind hold filter and the CONTI cleaning pill code n°466662
o
Follow the instructions on the display.
o
Repeat this procedure on each group.
-
Brush the filters in water containing detergent:
o
In order to unclog the holes
o
Never use a needle or a flame.

HALF YEAR MAINTENANCE:
-
A kit n° 450200, for the following operation is available for sale.
-
For each group:
o
Remove the sprinkler, diffuser, and seal gasket.
o
Scrub the gasket groove and the supplying hole on the group head.
o
Clean the two parts of the diffuser. Clear all the holes with a needle.
o
Reassemble the 2 parts of the diffuser on the group head
o
Place NEW Filter gasket (No. 002711), and NEW sprinkler (No. 415684)
-
Remove and clean the level sensor and the safety sensor (limestone deposit).