Conti LT 10, Инструкция по эксплуатации

Страница: 22 / 42

ENGLISH
22
TROUBLE-SHOOTING
The following table indicates:

The description of the problem or the most likely symptoms of malfunctioning.

The cause/s of potential damage.

Remedies.
PROBLEM CAUSE REMEDY
The machine
doesn't start
Power supply plug disconnected Connect the plug
Mains switch turned off Turn on the main switch
Bowl peg sensor missing Replace with a new one
Pressing the start
key, the
accessory does
not rotate
See previous causes
Connect the plug or turn on the mains
switch
Protection opened Close the accident-prevention device
Emergency button pressed Reset the emergency button
Bowl not positioned on the support Position the bowl on the support
Bowl not in working position (high) Bring the bowl into working position
The accessory
rotates counter-
clockwise
The phases of the machine do not
correspond with the power supply line Ask a professional electrician to switch the
phases on the plug
Loss of RPM on
the accessory
Drive belts loosened or worn Tighten the belts or replace them
Irregular rotation
of the accessory
Drive belt loosened or worn Tighten or replace the belt
Eccentric pinion damaged Replace the pinion
DECOMMISSIONING

Stop the work cycle of the machine.

Interrupt the electrical power supply using the mains switch n.1 to position 0.

Remove the power supply plug.

Move the machine to a storage facility.

Cover the machine with a nylon sheet.

Apply a sign with the words “OUT OF SERVICE”.
DISMANTLING AND DISPOSAL
No element of the machine must be disposed of in the environment.
Every part, component, or group of components must be separated according to the type of material.
The laws in force at the time of disposal must be observed.
The symbol on the device, as illustrated here, indicates that it must not be disposed of as urban
waste, but must be transported separately to a WEEE collection centre specifically organised for the
adequate treatment of electrical and/or electronic apparatus. See Directive 2002/96/EC of the
European Parliament and Council dated 27 January 2003 on wastes from electrical and electronic
equipment.
Incorrect disposal or inappropriate use of the equipment or parts of it may cause potentially
negative and harmful effects on the environment and human health.