irLED64-18x12SIX Series
- 18x12W 6-in-1 LEDs PAR projectors with infrared remote control
Page 23
English
7 - Infrared remote control
Button
Action
BlackOut
Projector OFF
Select Prog
Gives you access to the 30 static colours, and to macros. Use the
number keys 0 to 9, then use the + and - keys.
FLASH / SPEED
The action of this key depends on the mode of the projector :
- If the projector is using a macro or is in auto mode, this key acts
on the speed. Use the + and - keys to configure the speed.
- If the projector is in manual mode or uses a static colour, this
button acts on the strobe.
Use the + and - buttons to configure the strobe speed.
SLAVE / AUTO / SOUND
1 - First pressure
: Activates the slave mode (The red LEDs are
flashing).
2 - Second pressure
: Activates the autom ode The green LEDs are
flashing). The projector starts a 1-14 macro sequence.
Use the FLASH/SPEED button and the + and - buttons to configure
the speed.
3 - Third pressure
: Activates the music-sensitive mode (Blue LEDs
flashing).
Use the + and - buttons to configure the mic sensitivity.
DMX MODE
Allows you to choose a DMX mode.
Use the + and - buttons to switch from one mode to another.
SET ADDR
Allows you to configure the DMX address of the projector.
For instance, to configure the address 245 :
- Press SET ADDR, all the LEDs are flashing to indicate the process beginning.
- Press 2, the green LEDs of your projectors lit up to indicate the hundreds digit has been saved.
- Press 4, the blue LEDs of your projector lit up to indicate the tenths digit has been saved.
- Then press 5. All the LEDs will flash to confirm you the address has been saved properly.
RGBWAU
These buttons allow you to manually configure the value of each colour.
Select a colour with one of these buttons, then press the + and - buttons to change their level.
NOTE :
The display will indicate the projector status for each action via the remote control.
When changing of DMX mode via the DMX
MODE button or with the projectors menu
buttons, the LEDs will lit in a different colour
for each DMX mode.
The following table indicates the relations
between colours and DMX modes.
LED ON
DMX mode
Red
6 channels
7 channels
8 channels
2 channels
9 channels
4 channels
5 channels
Green
Blue
White
Red and Blue
Red and Amber
Red and Green
