irLEDs series -
LED PAR projectors with infrared remote control
Page 8
English
5.8 - CH.X Menu: Choosing a DMX mode
The irLED PAR projectors feature several DMX modes to be fully compatible with different remote controls and
projectors.Use the
UP
or
DOWN
buttons to choose a mode. The 5 following modes are available:
- 2-channel mode: Channel 1 = 10 preset colours, 5 macros and music-sensitive mode ; Channel 2 = Main dimmer.
- 3-channel mode: Channel 1 = Red ; Channel 2 = Green ; Channel 3 = Blue
- 4-channel mode: Channel 1 = Red ; Channel 2 = Green ; Channel 3 = Blue ; Channel 4 = Dimmer and Strobe
- 5-channel mode: Channel 1 = Red ; Channel 2 = Green ; Channel 3 = Blue ; Channel 4 = Dimmer ;
Channel 5 = Strobe
- 6-channel mode: Channel 1 = Red ; Channel 2 = Green ; Channel 3 = Blue ; Channel 4 = Dimmer ;
Channel 5 = Strobe or speed; Channel 6 = Fixed colours, colours sequencing and music-sensitive mode.
5.7 - XXX Menu: Switching to DMX mode
Press
MODE
until reaching the value of the DMX address. Configure the DMX address with
UP
and
DOWN
. In the
absence of any DMX signal, the display will flash.
5.6 - S.L.A. Menu: Switching to slave mode
Press
MODE
until reaching
S.L.A.
The projector will react to DMX signals coming from a similar projector.
The Master unit can use the automatic, DMX or music-sensitive modes.
5.5 - S.XX Menu: Activating the music-sensitive mode and configuring the mic sensitivity
Press
MODE
until reaching
S.00
and select a value with
UP
or
DOWN
. S.00 deactivates the music-sensitive mode.
S.01 is a very low sensitivty, whereas S.31 is the max sensitivity. The colours are sequenced without crossfade
when using the music-sensitive mode.
