Evora-Beam5R
- Beam moving head with Platinum 5R lamp
Page 13
English
This menu allows you to select the programs assigned to each of the 3 program groups, edit the 10 built-in programs and
edit the 250 scenes forming these programs.
The Evora-Beam5R can be assigned to 3 different slave groups (via the Slave mode function in the Function menu).
The designated Master unit sends programs containing slave groups information.
Programs are sent in a loop as follows :
Slave units receive every program but only reacts to those assigned to their group.
A unit assigned to the Slave 2 group will only react to the Auto Pro Part 2 program.
7.6 Edit Program
Submenus
Values
Description
Select Program
Auto Pro Part1 = Program 1 ~ 10
Program 1
Auto Pro Part2 = Program 1 ~ 10
Program 2
Auto Pro Part3 = Program 1 ~ 10
Program 3
Allows you to assign one of the 10 built-in programs to each
Auto Pro Part X
Edit Program
Program 1
Program 2
...
Program 10
• Pro Test
• Step 01 ~ 64
Allows you to select the scenes assigned to each program.
Press ENTER to assign one of the available scenes to each
step.
A single scene can be assigned to different steps.
Assign the
End
scene to the last step of the program to set the
end of the program.
Use the
Pro Test
submenu to visualise the scenes assigned to
the program you are currently editing.
Edit User mode A
Max Channel = XX
PAN = CHXX
...etc
User mode A editing :
- Max Channel is the number of channels used.
- PAN = CHXX is the channel used by the PAN function.
When a function is moved to another channel, it will be
replaced by the former function using the same channels.
Edit User mode B
Max Channel = XX
PAN = CHXX
...etc
""
Edit User mode C
Max Channel = XX
PAN = CHXX
...etc
""
Auto Prog
Part 1
Auto Prog
Part 2
Auto Prog
Part 3
Auto Prog
Part 1
Auto Prog
Part 2
Auto Prog
Part 3
