PILOT60 and 120 - Power and control units for dedicated projectors
English
ProG :
Program Mode
This menu allows you to create programs you will then be able to play from the Show Mode menu.
Select a program to modify from Sh1 to Sh19. Press ENTER to display the customisable values.
- SteP - This option allows you to access the customisable values of each step:
- Color (Colours of the two zones)
- c-1 (Zone 1 colours)
- c-2 (Zone 2 colours)
- Dimm (Dimmer of the two zones)
- d-1 (Zone 1 dimmer)
- d-2 (Zone 2 dimmer)
- Uhit (White for the two zones)
- u-1 (Zone 1 white)
- u-2 (Zone 2 white)
Note: the available options depend on the number of channels previously determined. If the colours per zone
are not available in the DMX configuration they will not appear in this menu.
Manu :
Manual mode
This menu allows you to manually control the unit and decide on which scene you want it to play.
To do so, modify the value of the targeted channel with the UP and DOWN buttons, then confirm with ENTER.
All the channels available in DMX mode are also available in Manual mode. Press the MENU button to cancel
and go back to the main menu.
baLa :
White balance settings
Allows you to adjust the white ebalance. You are able to modify the red, green and blue levels per zone
(PILOT120 only), or globally.
teSt :
Test mode
Allows you to test every function of the controller. Once the test program has been launched, press the
MENU button to interrupt it.
LEd :
Display settings
This function activates or deactivates the digital display while the device is being used.
FhrS :
Fixture uptime
Allows you to check on the device uptime.
ver :
Software version
Displays the current version of the operating software.
