Page | 5
IP-SDI 4i Product Manual 042020
Setup
Multiple ways are available to access control functions and configuration settings for the IP-SDI 4i.
Front Panel
For normal operation, the
Up/Down
buttons step through the entries in the channel list that has been loaded into the unit’s memory.
Left/Right
buttons are used to control the variable audio output level.
Configuration settings for AV setup, System setup and Network setup are available on the front panel LCD display.
Press the red
SETUP
button to access the front-panel menus
Press the
Left/Right
arrows to step through each configuration menu category
Press
SELECT
to enter the menu
Press the
Up/Down
arrows to view the settings
Press the
Left/Right
arrows to step through the setting options
Press
SELECT
to save the changes for each menu
Press
SETUP
to back out of a menu or exit configuration settings
On-Screen Menu
Many of the common AV settings can be configured in the on-screen menu. Buttons on the front panel or HD2-RC handheld remote may be
used.
Press
MENU
to bring up the on-screen menu
Press
Up/Down
to step through each menu category
Press
SELECT
to enter the menu
Press the
Up/Down
arrows to view the settings
Press
SELECT
to select a setting
Press
MENU
to back out of a menu or exit the on-screen menu
Web Pages
On board web pages are available control and configuration. Connect the ethernet port of the IP-SDI 4i to a PC. A crossover cable is not
required. Open a web browser in the PC and enter the IP address of the IP-SDI 4i into the address bar to access the web pages.
RS-232
The IP-SDI 4i may be controlled and configured using RS-232 ASCII strings from a terminal program or control system processer. Connection
to the unit for RS-232 communication can be through the DB-9 connector on the rear panel, the front panel USB virtual serial port, Telnet, or
UDP port 31931.
