Contemporary Research IP-SDI 4i, Руководство по эксплуатации продукта

Страница: 3 / 24

Page | 3 IP-SDI 4i Product Manual 042020
Overview
The Contemporary Research IP-SDI 4i Decoder is a professional MPEG-TS IPTV video decoder in a convenient half width single space rack
mount package. The IP-SDI 4i accepts MPEG2 or H.264 encoded UDP and RTP transport streams up to 1080p/60. The unit features
simultaneous SDI and HDMI outputs with video scaling from 480i to 1080p. Users can select channels, volume, and power from the front
panel controls, handheld IR remote, onboard web page, or external control system.
Operation requires that a channel list of program streams be entered in the unit’s memory. The entry for each IPTV program will include a
channel number by which it may be selected for viewing using the optional handheld IR remote, web page, or external control command.
Channel up/down commands will step through the channels in the list. CR Toolbox software is a free PC application designed to connect and
update CR products. It may be used to create and edit the channel list and upload the list to one or more IP-SDI 4i units. Individual channels
may be added to or deleted from the list using CR Toolbox software or via RS-232 command.
Features
Decoding

MPEG-TS IPTV streams

MPEG2 or H.264 video up to 1080p/60

Supports AC-3, MPEG 1 Layer 2 or AAC audio formats
 Multicast or Unicast
 SPTS or MPTS
Video

HDMI Type A, Version 1.4b

SDI output SD/HD/3G
 Output scaling to 480i, 720p, 1080i, 1080p, or Auto
Audio

SDI embedded AC-3 pass-through, PCM Fixed, or PCM Variable assigned to pair 1

HDMI embedded AC-3 pass-through, PCM Fixed, or PCM Variable
 SPDIF coaxial and optical AC3 pass-through, PCM Fixed, or PCM Variable
 Variable Analog stereo
Closed Captions

Decodes analog and digital closed captioning

Caption data available as 708 closed caption data on SDI output
Setup and Control

Front panel control for Power, Channel, Volume, Menu and Setup

Control via optional HD2-RC handheld IR remote

Two-way control via RS-232, Telnet, or UDP for use with third-party control systems.
 On board web pages for control and configuration
 Channel list loaded or updated using CR Toolbox. May be edited using RS-232 commands

Channel selection by direct channel entry or channel up/down

CEC control available on HDMI output for most CEC enabled displays

Setup via Front panel menu, On-screen menu, web pages, or RS-232 commands

Firmware updateable over Ethernet with CR Toolbox software