TD071200-0IC
6
Connectors
3-pin (MS/TP) Pin Assignments
(Also explained on product label)
RJ-45 (MDI Ethernet) Pin Assignments
1 TD +
3 RD +
2 TD –
6 RD –
(All other pins are unused.)
USB Mini B Connector (Aux)
This connector is only used for
firmware upgrades.
EIA-485 Bias and Termination Jumpers
U Install jumper to apply pull-up bias.
T Install jumper to terminate bus.
D Install jumper to apply pull-down bias.
(All jumpers are installed by default.)
Mechanical
Figure 5 — Product Dimensions
Figure 2 — RJ-45 Connector
Figure 1 — 3-pin Connector
Figure 3 — USB Connector
Figure 4 — Internal Jumpers