Contemporary Controls AI-SRVR, Руководство пользователя

Страница: 13 / 20

TD000200-0MB
13
The screen of Figure 6 offers three case-insensitive options :
R forces an immediate refresh of the screen. Otherwise, the screen refreshes itself
automatically every 10 seconds.
S opens the Setup Screen for configuration (Section 4.2.2).
C resets all 4 packet counters.
Q exits the AI-SRVR program. This option is unavailable when connected to the AI-
SRVR via the COM2 port. This port only allows program monitoring — it does not
allow configuration or program control.
4.2.2 AI-SRVR Configuration
By pressing “S” from the AI-SRVR Statistics Screen , the default AI-SRVR Configuration
Screen of Figure 7 appears to allow control of 16 parameters. All fields in the left column
(except Node ID ) are modified by pressing the space bar . These are :
Function should be toggled to the desired mode: SERVER or PROXY .
Boot Protocol is NONE by default, but can be toggled to DHCP .
Speed is 2.5Mbs by default, but can be set from 156kbs to 10Mbs . The
7.5Mbs option is the undocumented "reserved" speed of the
COM20022 — but it is not recommended for use.
Ext Timeout is STD by default, but can be set to 16X , 8X or 4X .
Recon Timeout is STD by default, but can be set to 64Nodes , 32Nodes or 16Nodes .
Receive All (promiscuous mode) is ON by default, but can be toggled to OFF .
Figure 7 — AI-SRVR Configuration Screen
Node ID is 1 by default, but a value from 1 – 255 can be entered .