TD000200-0MB
10
For initial configuration, the computer chosen for the procedure should temporarily have
its IP address modified as shown in Figure 4 — which uses a Windows 2000 example.
Figure 4 — Changing the IP Address of the Computer Used for Setup
The example in Figure 4 suggests an IP address for the computer of 192.168.92.
69
, but
the final quad of the address could be any value from 1 to 255 — except for
68
which is
used in the AI-SRVR’s default IP address. After the IP address of the computer has
been set to a value placing it in the same subnet as the AI-SRVR, the computer can
access the AI-SRVR via the unit’s default IP address using either a web browser or a
Telnet session. However, web browser access allows only monitoring — configuration
can only be done via Telnet or through the console port.
