Ver.1.00
RRY-16CX-USB
３
Connecting to a Connector
To connect an external device to this product, plug the cable
from the device into the interface connector (CN1) of unit
shown below.
* Please refer to the 2 page for more information on the supported cable and accessories.
Connector Pin Assignment
Pin Assignments of Interface Connector(CN1)
CN1
Pin No.
Signal
name
Meaning Pin
No.
Signal
name
Meaning
19 N.C.
37 N.C.
18
N.C.
36 N
17 Common of O-17
17
O-17
35
N 16
Common of O-16
16 O-16
34
N 15
Common of O-15
15 O-15
33
N 14
Common of O-14
14 O-14
32
N 13
Common of O-13
13 O-13
31
N 12
Common of O-12
12 O-12
30
N 11
Common of O-11
11 O-11
29
N 10
Common of O-10
10 O-10
+1 Output Port
28 N
07 Common of O-07
9
O-07
27
N 06
Common of O-06
8 O-06
26
N 05
Common of O-05
7 O-05
25
N 04
Common of O-04
6 O-04
24
N 03
Common of O-03
5 O-03
23
N 02
Common of O-02
4 O-02
22
N 01
Common of O-01
3 O-01
21
N 00
Common of O-00
2 O-00
+0 Output Port
20 N.C.
1
N.C.
O-00 - O-17
16 output signal pins. Connect these pins to the input signal pins of the
external device.
N00 - N17
Common pin corresponding to each output pin.
N.C.
No connection to this pin.
Block Diagram
Physical Dimensions
Using the Connectors
-Connector used 37-pin D-SUB connector
[F(female)type]
DCLC-J37SAF-20L9E [mfd by JAE]+
equivalence to it
Lock nut UNC #4-40 (inch screw threads)
-Compatible connector 17JE-23370-02(D8C)
[mfd by DDK, M(male)type]
FDCD-37P [mfd by HIROSE, M(male)type]
DC-37P-N [mfd by JAE, M(male)type]
Interface connector (CN1)
19
37
1
20
PLUG-IN Electronic GmbH • Am Sonnenlicht 5 • 82239 Alling • Tel.: +49 (0) 8141 3697-0 • [email protected] • www.plug-in.de