Contec IPC-PT/LS15 Series, Руководство по оборудованию

Страница: 31 / 39

3. Each Component Function
26 Hardware Manual
Setup of OS operation (SW2)
This switch sets OS operation. For details, refer to the software manual.
Default setting
1 2 3 4 5 6 7 8
ON
Default setting of DIP switch
Figure 3.13. Setup of OS operation
CAUTION
Use this setting for normal operation.
DIP switch for applications (SW3)
SW3 is a general-purpose switch available for use by the application. Refer to the software manual for
details on how to use this DIP switch.
1 2 3 4
ON
Default setting
Default setting of DIP switch
Figure 3.14. General Switch
COM2 RS-422A/485 transfer mode setting DIP-SW (SW4)
See "COM2 RS-422A/RS-485 data transmission mode setting" in this chapter.
WARNING
Operating a connector or jumper on the internal CPU board, which is not covered by this manual,
can cause the unit to malfunction or develop operational problems. Never touch any of those on-
board connectors and jumpers.