Contec HPC-HLS10 Series, Руководство по оборудованию

Страница: 6 / 39

1. Introduction
IPC-PT/MV10 / IPC-PT/LS10 / HPC-HMV10 / HPC-HLS10 Hardware Manual 1
1. Introduction
This product is a panel mount computer based on the SH-4 CPU, integrating a TFT color LCD display
with a touch screen. As the unit has assorted interfaces including the USB, PC Card, 100BASE-TX,
and RS-232C connectors, it can be used widely as a general-purpose terminal for embedded applications.
Under Windows CE .NET loaded from Flash ROM along with user programs, the unit is implemented
as diskless hardware without the need for a shutdown procedure.
A full line of models is available to support any power supply environment.
The product employs an aluminum front panel, resulting in shorter outside dimensions and lighter
weight than the conventional model. It also employs a simplified structure that makes installation
easier than the conventional model.
Features
- Slim, compact design with a lightweight aluminum front panel (Embedded portion 46/49 mm)
- Rear fitting to easily fix the unit in the installation hole
- LCD arm (VESA compliant 75 mm type) available for installation
- 128MB(SDRAM) system memory standard
- 32 MB of internal, erasable programmable Flash ROM available as a user area, allowing user
programs to be added and deleted.
- Standard with two channels of serial port (one of which can be set for the RS-422A/485)
- Standard with a USB port, PC Card slot, 100BASE-TX LAN connector, and general-purpose
isolated digital I/O ports (three for each)
- Standard with stereo sound subsystem (external speaker output)
- IP65/NEMA4 compliant front panel.
- Expansion unit [IPC-PAC(PCI)-C1] available as an option to add one short-size PCI board
Limited One-Year Warranty
CONTEC Interface boards are warranted by CONTEC CO., LTD. to be free from defects in material
and workmanship for up to one year from the date of purchase by the original purchaser.
Repair will be free of charge only when this device is returned freight prepaid with a copy of the
original invoice and a Return Merchandise Authorization to the distributor or the CONTEC group office,
from which it was purchased.
This warranty is not applicable for scratches or normal wear, but only for the electronic circuitry and
original boards. The warranty is not applicable if the device has been tampered with or damaged
through abuse, mistreatment, neglect, or unreasonable use, or if the original invoice is not included, in
which case repairs will be considered beyond the warranty policy.