Contec GP-IB(USB)FL, Руководство пользователя

Страница: 22 / 48

3. External Connection
GP-IB(USB)FL
17
3. External Connection
This chapter describes the interface connectors on the converter.
Check the information available here when connecting an external device.
How to connect the connectors
Connector shape
To connect an external device to this product, plug the cable from the device into the interface connector
(CN1) shown below. When connecting to the external device, fix the converter by tightening the screw.
Applicable connector(cable): GPIB cable(IEEE-488 rated)
12 24
1 13
Figure 3.1. Interface Connectors
Connector Pin Assignment
CN1
12
11
10
9
8
7
6
5
4
3
2
1
24
23
22
21
20
19
18
17
16
15
14
13
Logic GND
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
GND (Ground)
REN(Remote Enable) Management bus
DIO8 Data bus
DIO7 Data bus
DIO6 Data bus
DIO5 Data bus
GND
ATN
SRQ
IFC
NDAC
NRFD
DAV
EOI
Data bus DIO4
Data bus DIO3
Data bus DIO2
Data bus DIO1
Handshake
bus
Management bus
(Shield)
(Attention)
(Service Request)
(Interface Clear)
(Not Data Accepted)
(Not Ready for Data)
(Data Valid)
Management bus (End or Identify)
Figure 3.2. Pin Assignment of CN1