Contec DIO-32DM2-PE Скачать руководство пользователя

Страница: 14 / 63

1. Before Using the Product

DIO-32DM2-PE

Handling Precautions

Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.

There are switches and jumpers on this product that need to be set in advance.
Be sure to check these before installing to the expansion slot.

Only set the switches and jumpers on this product to the specified settings.
Otherwise, this product may malfunction, overheat, or cause a failure.

Do not strike or bend this product.
Otherwise, this product may malfunction, overheat, cause a failure or breakage.

Do not touch this product's metal plated terminals (edge connector) with your hands.

Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.

Do not install or remove this product to or from the expansion slot while the computer's power or

expansion unit is turned on.

Otherwise, this product may malfunction, overheat, or cause a failure.

Be sure that the personal computer power is turned off.

Make sure that your PC or expansion unit can supply ample power to all the products installed.

Insufficiently energized products could malfunction, overheat, or cause a failure.

The specifications of this product are subject to change without notice for enhancement and quality

improvement.

Even when using this product continuously, be sure to read the user’s guide and understand the
contents.

Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.

Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever

(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.

DANGER

CAUTION

Содержание DIO-32DM2-PE
































































Результаты поиска

Содержание DIO-32DM2-PE

Отзывы:

Похожие инструкции для DIO-32DM2-PE

Бренды по названию

Популярные бренды

Contec DIO-32DM2-PE, Руководство пользователя

Результаты поиска

Содержание DIO-32DM2-PE

Отзывы:

Похожие инструкции для DIO-32DM2-PE

Бренды по названию

Популярные бренды