1. Before Using the Product
DIO-6464T2-PCI, DI-128T2-PCI, DO-128T2-PCI
1
1.
Before Using the Product
This chapter provides information you should know before using the product.
About the Board
This product is a PCI bus-compliant interface board used to provide a digital signal I/O function on a
PC.
DIO-6464T2-PCI features 64 unisolated TTL level inputs and 64 unisolated open-collector outputs.
You can use 16 input signals as interrupt inputs. In addition, the digital filter function to prevent
wrong recognition of input signals is provided.
DI-128T2-PCI features 128 unisolated TTL level inputs. You can use 16 input signals as interrupt
inputs. In addition, the digital filter function to prevent wrong recognition of input signals is provided.
DO-128T2-PCI features 128 unisolated open-collector outputs.
Windows/Linux driver is bundled with this product.
Possible to be used as a data recording device for LabVIEW, with dedicated libraries.
Features
- Unisolated TTL level input, unisolated open-collector output
DIO-6464T2-PCI has the 64ch of unisolated TTL level inputs and 64ch of unisolated open-collector
outputs whose response speed is 200nsec. Output rating : max 30VDC, 40mA per pin.
DI-128T2-PCI has the 128ch of unisolated TTL level inputs whose response speed is 200nsec.
DO-128T2-PCI has the 128ch of the unisolated open collector outputs whose response speed is 200nsec.
Output rating : max 30VDC, 40mA per pin.
-
You can use 16 input signals as interrupt request signals.
(For DIO-6464T2-PCI, DI-128T2-PCI only)
You can use 16 input signals as interrupt request signals and also disable or enable the interrupt in bit
units and select the edge of the input signals, at which to generate an interrupt.
- This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a
chattering. (For DIO-6464T2-PCI, DI-128T2-PCI only)
This product has a digital filter to prevent wrong recognition of input signals from carrying noise or a
chattering. All input terminals can be added a digital filter, and the setting can be performed by
software.
- Windows/Linux compatible driver libraries are attached.
Using the attached driver library API-PAC(W32) makes it possible to create applications of
Windows/Linux. In addition, a diagnostic program by which the operations of hardware can be
checked is provided.
- LabVIEW is supported by a plug-in of dedicated library VI-DAQ.
Using the dedicated library VI-DAQ makes it possible to create each application for LabVIEW.
