Contec CONPROSYS CPS-MCS341-DS1-111, Справочное руководство

Страница: 57 / 72

—
Appendix
—
CPS-MCS341-DS1-111, CPS-MCS341-DS1-131 Reference Manual (Hardware)
— 57 —
1. Specifications
1. Specifications
Function Specifications
Item CPS-MCS341-DS1-111 CPS-MCS341-DS1-131
CPU
ARM Cortex-A8 600MHz
Memory
On Board 512MB DDR3 SDRAM
ROM
On-Board 32MB NOR Flash
for OS On-Board 64MB NOR Flash
for OS
LAN Transmission standard
10BASE-T/100BASE-TX
The number of channels
2
Connector
RJ-45 Connector
LED Speed (Yellow), Link/Act (Green)
USB Transmission standard USB2.0 standard follow
The number of channels 1
Connector TYPE-A
SD card slot Standard SD standard follow
Connector SD memory card slot
LED Read/Write (Green)
RS-232C
Baud Rate 300bps - 115.2kbps
Data length 5, 6, 7, 8 bit 1, 1.5, 2 stopbit
Parity check Even, Odd, Non-parity
Isolation/Resistance Non-isolated
The number of channels 1
Connector 9-pin D-SUB connector (Male)
LED Transmission (Green), Reception (Green)
Digital input and
Output
Input type Opto-coupler isolation input (Compatible with current sink
output) (negative logic) *1
Input isolation Opto-coupler isolation
Input voltage resistance 1000V
The number of input signal
channels 4
Open-circuit impedance 10kΩ or more
Short-circuit impedance 500Ω or less
Response time (digital
input)
Within 200μsec
Interrupt (digital input) 4 interrupt input signals are arranged into a single output of
interrupt signal.
An interrupt is generated at the falling edge (HIGH-to-LOW
transition) or rising edge (LOW-to-HIGH transition). (setting