—
Appendix
—
CPS-MC341-ADSC1-111, CPS-MC341-ADSC2-111, CPS-MG341-ADSC1-111 Reference Manual (Hardware)
—
73
—
Item
CPS-MC341-ADSC1-111
CPS-MG341-ADSC1-111
CPS-MC341-ADSC2-111
Parity check
Even, Odd, Non-parity
The number of channels
1
Connector
9-pin D-SUB connector (Male)
LED
Transmission (Yellow), Reception (Yellow)
Digital input/
Counter input
Input type
Opto-coupler Isolation Input (Compatible with current sink
output and current source output) (negative logic) *1
Isolation/Resistance
Bus Isolation /500VDC, Opto-coupler Isolation/1000V
Built-in power supply
12VDC
Input resistance
5.6kΩ
Input ON current
1.6mA or more
Input OFF current
0.16mA or less
Response time
Within 200μsec *2
Interrupt (Digital input)
4 interrupt input signals are arranged into a single output of
interrupt signal. An interrupt is generated at the falling edge
(HIGH-to-LOW transition) or rising edge (LOW-to-HIGH
transition). (setting can be done by software)
The number of channels
4 (It is possible to allocate 2channels to counter input)
Count type
Up count
Max. count
FFFFFFH (binary data)
Counter response speed
1kHz (Max.), Duty: 50% (Max.)
Interrupt (Counter input)
One interrupt caused upon channel count match
Timer
None
LED
DI0 - DI3 (Yellow)
Surge protection element
each signal to B_COM
Interactive TVS diode
Stand off voltage : ±30V, Peak pulse power : 400W(1msec)
Digital output
Output type
Semiconductor relay output
Isolation/Resistance
Semiconductor relay isolation/1000V
Maximum output voltage /
current
26.4VAC/VDC/100mA
Response time
Within 2msec
ON resistance
8Ω or less (at 25
℃
)
OFF leakage current
4μA or less (at 25
℃
)
The number of channels
2
LED
DO0 - DO1 (Yellow)
Surge protection element
+ to -
Interactive TVS diode
Stand off voltage : ±30V, Peak pulse power : 400W(1msec)
Digital input /
Counter input /
Digital output
Connector
2-piece 3.5mm pitch 10-pin terminal
(DI_ACOM, DI0, DI1, DI2, DI3, DI_BCOM, DO0+,
DO0-, DO1+, DO1-)
Applicable wire
AWG28 - 16