—
Installation
—
CPS-MC341-ADSC1-111, CPS-MC341-ADSC2-111, CPS-MG341-ADSC1-111 Reference Manual (Hardware)
—
68
—
7.
Digital Output
Digital Output Cable
Use the Digital Output cable described below.
Cable
Use copper wires that tolerate the temperature of 75 °C and higher.
Cable
Diameter
AWG28 - 16
Cable Length
The length differs depending on the actual use environment.
*
Refer to
"Digital Input / Counter Input / Digital Output Connecter"
in the
page 32
for details of the digital
output connector and pin assignment.
*The type of connectors in the package differs depending on the period of manufacturing.
To check the supplied connector type, refer to “Appendix – Connector Check”.
Digital output circuit
DO connects to the device controlled by the current drive, such as relay controlling or LED.
The connection requires an external power supply to deliver current.
ON/OFF of the device controlled by the current drive is controlled by digital value.
The rated of output current is up to 100mA per point.
CAUTION
When supplying power, all output will be OFF.
ATTENTION
À la mise sous tension de l’alimentation, toutes les sorties seront ÉTEINTES.
External device
pin(+)
This Product
External Power
Supply
Vcc
Semiconductor relay
Semiconductor relay
Load
Load
pin(-)
pin(+)
pin(-)
External Power
Supply
Output
Output
Output
Output