Contec CONPROSYS CPS-CNT-3202I, Справочное руководство

Страница: 28 / 58

—
Product Nomenclature and Function
—
CPS-CNT-3202I Reference Manual (Hardware)
— 28 —

Phase Z/CLR Input Enable Frequency (Positive logic)
Phase-Z is the signal to clear the counter to zero. The number of phase-Z inputs can be specified by
software.
Disable phase-Z input
Enable the next phase-Z input only once
Enable every phase-Z input
CAUTION

If phase-Z is set as negative logic, a valid signal of phase-Z input is low level.

If the phase-Z/CLR input is not used, be sure to set the phase-Z to “disable the phase-Z
input.”
ATTENTION

Si la phase Z est réglée comme logique négative, un signal d’entrée valide de phase Z est de
faible tension.

Si l’entrée de la phase Z/CRL est inutilisée, assurez-vous de régler la phase Z à « désactiver
l’entrée de la phase Z.
Phase-Z input
Counter
Ignored Ignored Ignored Ignored
- - - - - - - - - - - - - - - - - - - -
Phase-Z input
Counter
Start
Ignored Ignored Ignored
- - - - - - - - - - - - - - - - - - - - - - -
Start
Phase-Z input
Counter