Serial I/O Unit First step guide
Copyright 2011 CONTEC CO., LTD. All Rights Reserved.
CONTEC CO., LTD.
October 2017 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
https://www.contec.com/
NA00881 (LYLT593)
10122017_rev3 [02152011]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Initializing the Software
This assigns COM ports to the serial ports on the Unit. You can also change the COM port numbers
for existing COM ports.
- Start Device Manager
(1) Select "System" from "Control Panel" and start [Device Manager].
(2) Check that the new COM ports are
displayed in the [Ports] folder.
- Updating the Settings
(1) If you wish to change a port number,
open the properties page for the port
and click the [Advanced…] button
under [Port Settings].
(2) Use the [COM Port Number] combo
box to modify the COM port number.
You have now finished installing the initial setting of software.
* The name of the connected
product you have just added is
displayed.