Contec COM-4CN-USB Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 41

Contec COM-4CN-USB Скачать руководство пользователя страница 11

1. Before Using the Product

6

COM-4CN-USB

FCC PART 15 Class A Notice

EN55032 Class A Notice

Warning: Operation of this equipment in a residential environment could cause radio interference.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his own expense.

NOTE

FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

«
...
9
10
11
12
13
...
»

Содержание COM-4CN-USB










































Отзывы:

Нет отзывов