1. Before Using the Product
6
COM-1(PM), COM-1D(PM)
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in an
explosion, fire, electric shock, or failure.
CAUTION
-
Do not strike or bend the PC Card. Doing so could damage the PC Card.
Otherwise, the PC Card may malfunction, overheat, cause a failure or breakage.
-
Do not subject the socket used to connect the cable to the PC card to knocks or other excessive force.
Otherwise, the PC card may malfunction, overheat, or cause a failure.
-
Connect the cable to the card before inserting the card into the PC.
Otherwise, the PC card may malfunction, overheat, or cause a failure.
-
Do not try to remove the cable from the connecter on the PC card without pressing the locking spring
as this may prevent the cable from being securely connected.
-
When inserting the PC card, check that you are inserting the card with the correct orientation and
that the card is inserted firmly.
Inserting the PC card incorrectly may damage the PC card or connector or result in a bad connection.
-
Ensure that the PC power supply has sufficient capacity for all mounted cards.
An inadequate power supply may cause misoperation, overheating, or faults.
-
The specifications of this product are subject to change without notice for enhancement and quality
improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
-
Do not modify the product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
The following information only applies to the COM-1D(PM).
-
Only set the switches and jumpers on the PC Card to the specified settings.
Otherwise, the PC card may malfunction, overheat, or cause a failure.
