1. Turn on your VCR.
2. Press [DEVICE], then [MUTE] together - hold both
buttons down until the lighted mode buttons start blinking
in sequence.
3. Press [VCR]. The [VCR] button will illuminate.
4. a. Press and hold [CH
^
] until your VCR turns off. As
soon as your VCR turns off, release [CH
^]
.
OR
b. From the VCR Setup Code list below, locate and
enter the 3-digit code for your brand. If multiple
codes are listed, you may have to enter several 3-
digit codes until your VCR turns off.
5. Press [MUTE]. If your VCR turns back on, press [VCR]
to lock in the code. The [VCR] button will blink 2 times
and go out.
If your VCR does not turn back on, repeat steps 4 and 5
above until you can turn your VCR off and on.
u
Write your VCR brand & setup code ___________________
u
NOTE
when using the Point and Press™ Programming
method (step 4a.). If you find a code that turns your VCR off
but not back on (step 5.), you may have gone past the
correct matching code. Try pressing [CH
v
] one step at a
time until you find a code that turns your VCR back on. Refer
to Section 14 for Code Number Readback.
VCR Setup Codes
Admiral 114
156
Adventura 125
Aiwa 125
Akai
111 121 151
Audio Dynamics
107 144
Bell&Howell 105
124
Broksonic
109 148 153 164
Canon 108
134
Citizen
102 106 128 160
Colortyme 144
Craig 128
130
Curtis Mathes
108 113 134 144 160
Daewoo
106 110 112 157 158
Daytron 158
155
DBX
107 144
Dynatech 125
Emerson
102 103 106 108 109
122 133 140 149 151
164
Fisher
105 115 124 130 152
Funai 125
GE
108 127 128 134 141
Go Video
119 143 163
Goldstar (LG)
102 160
Harman Kardon
144
Hitachi 125
146
159
Instant Replay
108 117 134
JC Penney
105 108 117 128 134
144 146
JCL 108
JVC
104 105 107 126 138
160
Kenwood 105
107
160
Logik
142
LXI 102
125
Magnavox
108 125 134 136
Marantz
105 108 136 144 160
Marta 102
Memorex
102 105 125 130 134
MGA / Mitsubishi
123 129 131 147
MTC 125
128
Montgomery Ward
114 125 127 134 137
162
Multi Tech
125 128 142
NEC
105 107 144 170 171
Orion
122 149 165 166 167
168
Panasonic 108
113
134
Pentax 146
Philco 108
134
136
Philips
108 117 134 136
Pioneer 145
146
Portland 158
ProScan 127
141
Quasar 113
134
Quartz
101 108 116 117 127
128 137 141 146
Realistic
105 114 125 130 134
RCA
101 108 116 117 127
128 137 141 146
Samsung 121
128
139
Sansai 142
Sanyo
105 124 130
Scott
103 106 131 142
Sears
102 105 115 130 146
Sharp 114
156
Shintom 142
Signature 2000
114 125 127 137 162
Sony 132
135
150
Sylvania
108 116 117 125 134
136 165 172
Symphonic
125
Tandy
105 125
Tatung
107
Teac
107 125
Technics
108
Teknika
102 153
Toshiba
105 115 146 152
Totevision
102 128
Unitech
128
Vector Research
131 144
Video Concepts
144
Wards
102 114 125 128 160
XR-1000
142
Yamaha
105 107 144
Zenith
118 135 138 161
6. Programming Your Auxiliary Device
To program (setup) the remote to operate your
AUXILIARY device (2
nd
CABLE, 2
nd
TV, 2
nd
VCR)…
1. Turn on your AUXILIARY device (2
nd
CABLE, 2
nd
TV, 2
nd
VCR).
2. Press [DEVICE], then [MUTE] together - hold both
buttons down until the lighted mode buttons start blinking
in sequence.
3. Press [AUX]. The [AUX] button will illuminate.
4. Press [TV] to program a 2
nd
TV as your AUXILIARY
device. The [AUX] and [TV] buttons will blink together.
Or press [CABLE] or [VCR] to program either of these as
your AUXILIARY device.
5. a. Press and hold [CH
^
] until your AUXILIARY device
turns off. As soon as your AUXILIARY device turns
off, release [CH
^
].
OR
b. From the TV (Cable, VCR) Setup Code lists, locate
and enter the 3-digit code for your brand. If multiple
codes are listed, you may have to enter several 3-
digit codes until your AUXILIARY device turns off.
6. Press [MUTE]. If your AUXILIARY device turns back on,
press [AUX] to lock in the code. The two illuminated
buttons will blink 2 times and go out.
If your AUXILIARY device does not turn back on, repeat
steps 4 and 5 above until you can turn your AUXILIARY
device off and on.
u
Write your AUX device brand & setup code ______________
u
NOTE
when using the Point and Press™ Programming
method (step 4a.). If you find a code that turns your
AUXILIARY device off but not back on (step 5.), you may
have gone past the correct matching code. Try pressing [CH
q
] one step at a time until you find a code that turns your
AUXILIARY device back on. Refer to Section 14 for Code
Number Readback.
