Contec BX-S959SD Series, Руководство пользователя

Страница: 50 / 81

BX-S959SD Series User’s Manual 49
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced Chipset Security Boot Save & Exit
Security
Configure the security of the system settings.
Password Description
If ONLY the Administrator’s password is set ,
then this only limits access to Setup and is only
asked for when entering Setup.
If ONLY the user’s password is set , then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights. The
password length must be In
the following range:
Minimum length
3
Maximum length 20
Administrator Password
User Password
→← : Select Screen
↑↓
: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Figure 4.18. Security
Administrator Password
Set the Administrator Password.
Press Enter to display the following screen for entering the password.
Administrator Password
Create New Password [ **** ]
]
Confirm New Password [ ****
Enter a password at least 3 characters long twice.
To disable the password, enter the Administrator Password entry screen again.
User Password
Set the user password.
Press Enter to display the following screen for entering the password.
User Password
Create New Password [ **** ]
]
Confirm New Password [ ****
Enter a password at least 3 characters long twice.
To disable the password, enter the Administrator Password entry screen again.
Be careful to not forget the password. If you forget the password, the product will have to be repaired at an
extra cost.