BX-S959SD Series User’s Manual
21
◆
Attaching the FG
(1)
Use screws to attach the FG.
Figure 3.4. Attaching the FG
-
The FG pin of this product is connected to the GND signal of the DC power connector (DC-IN).
-
Note that the connection cannot be cut off.
-
Screw holes may be damaged if screws are tightened with a torque greater than the specified torque. The
specified tightening torque is 5 - 6kgf
・
cm.
Содержание BX-S959SD Series
Страница 7: ...vi BX S959SD Series User s Manual ...