Contec AD12-16(PCI), Руководство пользователя

Страница: 18 / 76

Setup
AD12-64(PCI), AD12-16(PCI)
11
Installing for Windows 95
Installing the board hardware
Before the board can be used under the Windows 95 operation
system (OS), the OS must recognize the assigned I/O address range
and the interrupt level (IRQ) of this board and register these
information into OS itself. Refer the following procedure to
register the board information for
Windows 95.
Checking the OS version
Note that the procedure for installing the board depends on which
version of Windows 95 you are using. Check the version of
Windows 95 on your system as follows before installing the board.
(1) Open [Control Panel] from [My Computer].
(2) Double-click on the [System] option to open the [System
Properties] property sheet.
(3) Check the "System:" number displayed on the [General] page.
System : Microsoft Windows 95
4.00.950
The version numbers of Windows 95 include 4.00.950, 4.00.950a,
4.00.950B and 4.00.950C. The board setup depends on the
version number of Windows 95 that is being used.