Contec 955 Series Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 116

Contec 955 Series Скачать руководство пользователя страница 9

1. Introduction

2

PT-955LXC-DC5311

User’s

manual

-

Falling-off prevention tools and cable clamps provided to avoid trouble caused by disconnected cable

This product stays trouble-free, being equipped with USB removal prevention fitting and cable clamp for
connectors with no locking mechanism, such as USB cable, and with hardware to properly mount and
avoid falling out of CF card.

-

Safety design required for embedded applications

Retention of CMOS data by EEPROM allows the system to start up even when the battery has run out.
For Windows Embedded Standard installed model, it is possible to use the EWF*2 function of OS. It is
designed for safety required for embedding purpose, for example, prohibiting unwanted writing to the CF
card with EWF function will relieve the concern about the writing limits to the CF card and prevent an
unintentional system alteration.

*2

EWF (Enhanced Write Filter) is a function specific to Windows Embedded Standard that protects the disk from being actually written

by

redirecting the writing to RAM.

- A wide range of power supplies (10.8 - 31.2VDC) supported

As the product supports a wide range of power (10.8 - 31.2VDC), it can be used in a variety of power

environments. The separately available AC adapter adds support for 100VAC power. *3

*3

When using the AC adapter, limits are placed on the expansion board power supply capacity and the external device power supply

capacity.

- Touch panel enables keyboard-less operation.
These products have analog touch panel enabling mouse emulation using driver software.

Supported OS

-

Windows Embedded Standard 2009 (PT-955LXC-DC5311)

«
...
7
8
9
10
11
...
»

Содержание 955 Series





















































































































Отзывы:

Нет отзывов