21
Stage 3: Trimming
1. This display allows you to select and trim loop B by up to 3dB if
appropriate. If this is not applicable, select “Continue”. Otherwise,
make necessary trimming adjustments and then select “Continue”.
2. Manual loop setup is now complete. Select “Continue” to return to
the main menu.
Note: If the driver current has been attenuated but the driver has
been set up to not go above the maximum value (e.g. the 5.5A
display above), then the ‘ATTN’ symbol will vanish when moving
away from this screen.
3. If using a V34, manual loop setup is now complete. If using a V22a
or V34a, select “Continue”.
