15
5a. If the values at 100Hz and 5KHz are /-3db of the value
measured at 1KHz, this section is complete. Select “Continue”:
5b. If the driver has calculated that High Frequency Compensation
is required, it will ask whether to apply this correction. Selecting
“Yes” is recommended.
5c. If the driver cannot provide ideal High Frequency Compensation,
it will ask whether to apply the maximum adjustment available.
Selecting “Yes” is recommended.
Stage 2: Loop Drive
1. Select “Yes” when prompted by the following screen:
The driver will begin outputting a 1KHz sinewave signal at a low
level (2Arms) to allow accurate setup.
