6
12. Connect all components together by following the below:
Insert the
power supply
here
MIC
Connect
microphone
LED
Insert the 3-way
connector for
halo LEDs (if halo
indicator microphone
is installed)
LOOP
Connect the
sign with the
built-in aerial
POWER
Flange for mounting
underneath counters
(features 4 holes for
screw installation)
7. Check the cable route to the driver location, especially cable length
to other components and access through the counter top.
8. Place the driver in your preferred location under the staff counter.
13. Route all the cables neatly to the driver using trunking or cable
tacking as necessary.
9. Mark the 4 fixing points for drilling.
10. Drill and fix the driver in place using
the screws provided.
11. Install the power supply close to
a power socket outlet using the
supplied mounting bracket and
fixing screws.
Fixing points
