Constructor CTDP2200-5L, Оригинальное руководство пользователя

Страница: 13 / 27

13
repaired. Many accidents are caused by using
poorly maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools,
etc., in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions and
the work which needs to be done. Using a power
tool in ways for which it was not intended can lead
to potentially hazardous situations.
Service
Your power tool should be serviced by a qualified
specialist using only standard spare parts. This will
ensure that it meets the required safety standards.
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger
of suffocation!
ADDITIONAL SAFETY
INSTRUCTIONS FOR WALLPAPER
STRIPPERS
▪
Do not use any other liquid than tap water.
▪
Do not allow any water to come into contact with
electrical sockets or connections.
▪
Do not use the steam plate on or near any
electrical socket.
▪
Never immerse the unit in water or pour water
over it.
▪
Be careful when working overhead—hot water
may drop down.
▪
Never modify your unit in any way. Repairs
should only be carried out by an authorized
Service Agent.
▪
Ensure that this device is only operated on level
surfaces. Tilting positions are to be
absolutely avoided.
▪
Always unplug at the mains and wait three
minutes before opening filler cap to add more
water.
▪
Always unplug the unit when not in use.
▪
Remove the steam pipe only when the device
has been switched off for at least 3 minutes.
▪
Allow the unit to cool before storing.
▪
Empty the water tank before storing.
▪
Do not point the device on humans, animals or
electrical devices.
▪
Always check the working surface to see if it is
suitable for the device.
▪
Always take the power plug from the outlet
before you fill the device with water.
▪
Do not use cleaning products, acids or
flammable liquids in the device.
▪
Do not use the device without tank cap.
▪
Avoid contact of the hot parts of the device.
SYMBOLS
Warning / Danger!
Read manual before use.
Warning: hot surfaces!
In accordance with essential
applicable safety standards of
European directives
Class I
ELECTRICAL SAFETY
Always check that the
power
supply corresponds to the
voltage on the rating plate.
DESCRIPTION
1. Steam plates
2. Safety valve
3. Reservoir cap
4. Water tank
5. Handle
6. Flexible steam hose
7. Power plug for connector
8. Connection cable
ASSEMBLY
Assembling the hose and the steam plate
▪
Fasten the steam pipe to the device and to the
steam plate.
Filling the water tank
▪
Fill the tank with max. 4.5 l tap water. Do not fill
over the maximum. Close the tank opening by
means of the tank lid.
Assembling the connecting cable
▪
Connect the connecting cable to the connector
of the device and connect the mains plug
to the wall socket. The water will now begin to heat
and after approximately 10-15 minutes, steam will
be released from the steam plate.