10
Each of these jacks mates with a matching jack on the power supply. Be sure to connect the Analog Right
power jack on the preamp to the Analog Right power jack on the power supply, the Analog Left power jack on
the preamp to the Analog Left power jack on the power supply and the Control power jack on the preamp to
the Control power jack on the power supply.
Before connecting these cables, switch off the Cygnus’s power supply and disconnect it from the AC power.
Failing to do this can damage the Cygnus or its power supply.
8. RS-232
This DB-9 style serial connection can be used to interface
the Cygnus with third-party control systems such as those
from AMX, Crestron and Control4. It can also be used to
update the Cygnus’s firmware. For more information,
contact your dealer.
9. USB / control
This USB jack is used to interface the Cygnus with third-
party control systems such as those from AMX, Crestron
and Control4, and also to update the Cygnus’s firmware.
For more information, contact your dealer.
10. Hub
This connection is currently inactive and is reserved for
future use.
11. Trigger out
This 3.5mm jack outputs a 12-volt DC control signal when
the Cygnus is on or in standby mode. It can be used to
automatically trigger the power on amplifiers, home
automation devices, etc., that accept a 12-volt trigger
input signal.
12. Link (main chassis)
This jack carries audio and control signals between the
Cygnus main chassis to the power supply. It uses a DVI
digital cable, which is provided with the Cygnus.
Содержание Cygnus
Страница 1: ......
