5
9. Set 7-day programme
06:00
10
20
08:00
19ºC
4ºC
ºC
12:00
22ºC
14:00
16:00
16ºC
22ºC
10ºC
22:00
PROGRAM 1
PROGRAM 2
PROGRAM
3
PROGRAM
4
PROGRAM 5
PROGRAM 6
An example of one day program on
PLSTiERF
TIM
E S
ETT
IN
G
PROGR
A
M
S
ET
TIN
G
- SET MINUTES
- SET DAY
- SET HOURS
- SELECT DAY TO SET PROGRAM
- SET MINUTES FOR PROGRAM
- SELECT PROGRAM TO SET
- SET TEMPERATURE FOR PROGRAM
Logic diagram for setting program on PLSTiERF
PROG
MODE
TEMP
1.
Press and hold PROG for 5 seconds to enter the
time setting.
2.
The day will be flashing.
3.
Use TEMP and MODE to navigate day, press PROG
to select day.
4.
PROG 1 will be flashing. Use TEMP and MODE to
navigate program, use PROG to select program.
5.
The minutes will be flashing.
6.
To set minutes, use TEMP and MODE to change
minutes, press PROG to set the minutes.
7.
The hour will be flashing
8.
To set hour, use TEMP and MODE to change hour,
press PROG to set the hour.
9.
The temperature will be flashing.
10. To set temperature, use TEMP and MODE to
change temperature, press PROG to set
temperature.
To add another program repeat steps 2-10.
The PLSTiERF has a 7-day timer with up to 6
programming steps available for each day. In the
programming you can set a start time and a
temperature for each program.
13. Heat symbol on the display
Every time there is a demand for heat, the display will
show the heat icon.
- Reduced heat output when the room temperature
is close to the set temperature - allows for almost silent
operation.
- full heat output
11. Advance mode
Press PROG from PROG mode to bring forward the next
program. To clear advance mode, press PROG.
If you do not require the use of all 6 programs they should
be set as inactive. When in programming mode select
the program you want to make inactive and press the
TIME button. If the program is inactive the display will show
“
- -:- -
”. To activate the program again press the TIME
button.
If you require the same set of programs throughout
the week it is possible to copy all the programs from
one day to another.
To do this, when in programming mode press and
hold the TIME button and this will bring you to the
copy day mode. To select which day you wish to
copy press the PROG button and this will cycle
through numbers 1-7 on the screen, this relates to
which day you would like to copy. 1=MON, 2=TUE,
3=WED etc.
To select which day you would like to copy the pro-
grams to, use the TEMP & MODE to navigate to the
day. Once both are selected, press the time button
to copy the day. The ‘To’ will flash to indicate this has
been done.
-
SET HOUR FOR PROGRAM
12. Copy day function
10. Set program inactive
66001080 Iss 01
