Manual Electrophoresis Power Supply, rev. 32/2018
1
English
General Information
Introduction
This instrument is manufactured with the latest technology and needs no particular maintenance. Consort
certifies that this instrument was thoroughly inspected and tested at the factory prior to shipment and found
to meet all requirements defined by contract under which it is furnished. However, dimensions and other
physical characteristics may differ.
The normal operating temperature should be between 0° and 40°C.
Never use the instrument in a room with high humidity (>95 %) or at very low temperatures (condensation
water!).
Manufacturer
Consort bvba
Hertenstraat 56 unit 9
Tel
(+32)(0)14 41 12 79
2300 Turnhout
Fax
(+32)(0)14 42 91 79
Belgium
Warranty
This instrument (excluding all accessories) is warranted against defective material and workmanship for
period of thirty-six (36) months from the date of shipment ex-factory.
Consort
will repair all defective
equipment returned to it during the warranty period without charge, provided the equipment has been used
under normal laboratory conditions and in accordance with the operating limitations and maintenance
procedures in this instruction manual and when not having been subject to accident, alteration, misuse or
abuse. A return authorisation must be obtained from
Consort
before returning any product for warranty
repair on a freight prepaid basis!
Consort
is not liable for consequential damages arising out of the use or handling of its products.
Servicing
In the event of this instrument being returned for servicing, the owner is requested
NOT
to send the following
items unless they are suspect:
•
Manual
•
Cables
•
Accessories
If serious malfunctioning occurs, stop using the unit immediately and consult your local
Consort
dealer.
Keyboard
•
During
SETUP
or programming a procedure:
= Buttons for entering a value or for selecting a function.
✓
= Button for programming and confirming the desired parameters.
Hold this button pressed to return to the main menu!
/
= Button to
•
start the procedure (MANUAL or METHOD),
•
cancel while entering a parameter (SETUP),
•
return to the previous menu (SETUP).
•
While running a
PROCEDURE
:
= Buttons for selecting a display configuration.
✓
= Button to modify the parameters.
/
= Button to stop or to pause the experiment.
